Sculpting is an activity that is suitable for children and adults, develops fine motor skills and creative thinking, and has a positive effect on the functioning of the brain. You can start classes from an early age of two years.

Modeling mass is modern counterpart plasticine with a more plastic texture, it does not leave marks on clothes and does not stick to it, it can be easily removed from carpets. In shops for creativity, you can buy ready-made sets with a mass for modeling.

Unlike plasticine, the mass is softer, it is easier for young children to work with it. After classes, the mass must be removed in a special container to protect it from drying out.

On the Internet, you can find many photos of the mass for modeling, they are varied in color and texture, due to the variety of compositions.

How to make a sculpting mass

Cooking the mass at home does not require special skills. Basically, the composition includes flour or starch, bright colors are achieved due to dyes.

Depending on the composition and storage method, the mass can be reusable or self-hardening.

Flour-based mass

The composition of the simple recipe mass for modeling includes only 4 ingredients that can be found in every housewife in the kitchen:

• Fine salt
• Vegetable oil (can be excluded, added for better plasticity)

This recipe does not require cooking and even a child can cope on its own. Colors and flavors are added as desired. When using dyes, liquid is mixed with water, and dry with bulk ingredients.

The dry ingredients are mixed in a container in an amount of one to one, if desired, add one tablespoon of vegetable oil, water is required as much as flour. Add water and mix with a spoon, when the mass begins to thicken, knead the dough with your hands until you get homogeneous mass... When finished, the dough does not stick to your hands and has a plastic texture.

You can diversify the recipe by replacing vegetable oil with a few drops of glycerin, and for a more durable texture, you can add a tablespoon of PVA glue. Before use, the mass is stored in a plastic bag in the refrigerator. The bag protects the dough from drying out, and the cold helps preserve its plastic properties.

Shaving foam mass

Another interesting recipe, includes:

• Shaving foam
• Acrylic paints
• Starch

Squeeze the shaving foam into a container and mix it with acrylic paint until a uniform color is obtained. Pour out the starch little by little, constantly stirring the mass. The main thing in this recipe is not to pour the starch, add it gradually.

Sometimes a little vegetable oil is added to the composition for elasticity. The recipe is neither complicated nor expensive. This mass is not suitable for long-term storage, when it dries, it crumbles and not everyone may like the smell, it can also be noted that when sculpting, the hands get dirty, since a little starch remains on the hands.

However, there are more advantages - the mass turns out to be very soft, pleasant to the touch and has an airy consistency, and the colors are bright, the process of creation is fascinating and children really like.

Self-hardening modeling compound

The recipe is not complicated and all ingredients are available.

The composition includes:

• Baking soda
• Starch

For cooking, you will need a suitable sized ladle, stewpan. We mix all the ingredients in it - two parts of soda, and one part of water and starch. Mix everything well and put the saucepan on medium fire... When cooking, the mass must be continuously stirred with a whisk.

After about half a minute, the mass turns into a lump, remove the saucepan from the stove. Liquid can be added to the ready-made mass food colorings and knead to obtain an even color.

If no dyes were found, ready-made figures can be painted with any paints. Both potato and corn starch are suitable for this recipe. When cooked from cornstarch, the mass is the most plastic.

The resulting mass is also suitable for reusable use; sealed containers are used for storage. The mass hardens itself at room temperature within 24 hours.

Making a mass for modeling with your own hands will help save money and diversify the creative process. The advantages of creating a mass at home are that you can choose the optimal method and composition, as well as cooking from natural materials, ensures the safety of use.

Cooking does not take much time, and the process is not complicated and children really like it. The mass is suitable for various applications, creating Christmas tree decorations, for unique handmade gifts.

Photo of mass for modeling

Modeling is an exciting activity for adults and children, especially since now there are many new materials. She perfectly develops children's thinking, imagination and motor skills, promotes self-expression. In addition, co-creation brings together and helps to establish contact with other children and parents. Self-hardening mass for modeling is affordable, not in short supply, and if desired, the material can be made independently.

Description

During work, the substance is easily wrinkled and amenable to processing. It is softer than plasticine and does not harden when low temperatures... If the mass is not placed in a container and covered with a tight lid, it dries up, after which its further use is impossible.

In addition, colored elements do not stick together when creating a shape. As an advantage over simple plasticine, it is worth noting a huge palette of colors and the possibility of using various shapes and tools for modeling. In addition, the mass has a light structure, which does not require much work.

Compound

The self-hardening modeling mass contains only natural ingredients, since it was created for children. The main components of different trade marks the same are soda, salt and flour. Dyes and flavors for a given composition may be different and be a kind of a visiting card of the manufacturer.

Salt is a preservative that helps to preserve mass, prevents sticking and practically does not stain the work surface.

Polymer clay and plasticine also have plasticity and are produced for modeling, but their composition is unnatural and not recommended for use by children. They are based on PVC and a plasticizer, it is thanks to them that the elasticity of the material is achieved. Polymer clay is quick-drying and dries only when heated.

Benefit

Do-it-yourself self-hardening mass has many advantages.

Scroll useful properties is like this:

• stimulates self-expression and the formation of artistic taste;
• activates the development and training of fine motor skills, as a result of which the baby's speech improves faster;
• activates imagination;
• stabilizes the nervous system;
• improves brain function and the ability to think.

Since children love everything color and bright, manufacturers try to surpass each other in the variety of the palette. In addition to the colors of the rainbow, this includes a variety of shades, and if you combine different fragments, you get a semblance of a marble pattern, which will not leave indifferent any kid. A huge plus is the presence of various shapes and tools, so the sculpting process will be much more interesting.

Kinds

There are several types of lightweight for modeling with a number of distinctive properties:

1. Self-hardening paste in the air. Its main feature is fast drying (within half an hour), this can be seen from the lightening color of the figure. As a result, the mass becomes firm and does not change with temperature fluctuations. The finished product can be painted, but over time it cracks and breaks easily.
2. Fast drying. Dries in layers, starting from the top and gradually reaching the middle. Drying time depends on thickness, air temperature and figure weight.
3. Not solidifying. Due to its special composition, it does not dry out for a long time, so it is not scary if the child leaves it uncovered. Nevertheless, forgotten for a week, the mass loses its plasticity and is restored only upon contact with warm water.
4. Transparent self-hardening sculpting mass. The material allows not only to show imagination during creativity, but also when creating the paste itself. You can add glitter, dye, mother of pearl and other elements to it. Another extra bonus- this is the ability to blow colorful bubbles from the mass.

How to choose

First of all, the material with which the child works must be safe and natural. Excessive amounts of dyes, flavors and preservatives can cause allergic reactions in children. Therefore, when choosing, it is necessary to rely on the composition without unnecessary additives.

If the packaging allows you to see the product, it is worth examining it carefully. Light self-hardening modeling mass should be without any lumps and inclusions, homogeneous. It's good when the material is in a bag - you can not only see it, but also feel it, evaluate its plasticity.

Most manufacturers pack their products in sealed packages, so you have to rely on the composition and intuition. If there is even a subtle plastic or chemical smell, it is recommended to refuse to purchase.

How to use?

The process of using a self-hardening mass for modeling has some differences from working with plasticine. In order for a child to get carried away with a new occupation for him, first it is necessary to create the following conditions for him:

1. The place where he will sculpt should be well lit without drafts.
2. The work surface is covered with oilcloth or a board is used for work.
3. They put the jars in front of the child and explain that it is not necessary to mix everything at once, but it is better to take a little at a time and close the container.

1. The child is given a little mass so that he gets acquainted with the texture that is unusual for him, kneads it in his hands, tried to divide into parts, knead or combine two fragments. Then you can start making simple one-color and two-color figures. For example: fruits, vegetables, balls, objects. Then you can try to cut shapes using molds.
2. The next stage is more complex products... All components of the conceived figure are sculpted separately. It is better not to delay the process, otherwise the parts will dry out and it will be difficult to connect them together. If this cannot be avoided, you can use water or PVA glue.
3. During the connection of all the finished elements, they are pressed against each other with neat, confident movements.
4. After that, the figure can be left to dry completely, and then play with it or store it as a craft.
5. There is no need to rush to remove everything after the child, it is better if at least partially he will do it himself. The mass must certainly be folded into jars and tightly closed with a lid, if it has dried out in some way, it can be restored if it is sprayed with water and kneaded properly.

How to make pasta with your own hands - recipe number 1

Sometimes parents have a question about how to make a mass for modeling at home.

You can make such a paste yourself using following recipe:

• flour - 160 g;
• water at room temperature - 120 ml;
• coarse salt - 80 g;
• vegetable oil - 1 tbsp. l;
• any food coloring available - 0.5 tsp.

All dry ingredients are mixed. In a separate bowl, bring water to a boil and add the ready-made dry mixture there. The mass is constantly stirred until a ball is obtained, then spread on a board sprinkled with flour. When the ball cools down, it is thoroughly kneaded until it comes off the hands and acquires plasticity.

How to make pasta with your own hands: two more recipes

• 1 tbsp. starch (better than corn starch, but potato starch can also be used);
• 2 tbsp. baking soda;
• water.

Starch is mixed with soda, poured into a saucepan and put on fire. Add a little water and, with constant stirring, bring to the formation of a ball, if necessary, water can be topped up. When the mass has cooled, it is thoroughly kneaded.

There is another recipe for making modeling paste:

• 1 glass of water, salt, flour;
• 1 tbsp. l of vegetable oil;
• 30 g of tartar.

All dry components are mixed, then oil, water, tartar and dyes are poured in. Then the mass is placed in a microwave oven at medium power and heated for 5-6 minutes. After cooling it is kneaded well.

The ready-made homemade mass is stored in a container or bag in the refrigerator, purchased in the store - at room temperature in a container with a tightly closed lid. If you follow all the rules for use and storage, the modeling paste will delight the child for a long time and will allow him to show his imagination every day.

The best and proven recipes for dough (masses) for modeling for children's creativity. Ideas for using homemade plasticine in children's games and fakes.

Salted Modeling Dough Recipes

Do-it-yourself salty dough is an ideal material to start modeling with toddlers 1-2 years old. It is soft, pliable, pleasant and natural. In addition, the dough preparation process is quite simple and does not take much time.

Simple salty dough for babies:

• 300 gr. flour;
• 300 gr. salt (not stone and not iodized);
• 200 ml. cold water;
• 1 tbsp. l. vegetable oil;
• dye (optional).

Elastic salty dough with starch:

• 150 g flour;
• 150 g corn starch;
• 300 gr. salt;
• 200 ml. cold water;
• 1 tbsp. l. vegetable oil.

Soft salty dough with cream:

• 300 gr. flour;
• 150 g fine salt;
• 100 ml cold water;
• 1 tbsp non-greasy cream;
• dyes.

Fragrant modeling dough

Add to dough for flavor essential oil or spices: vanilla, nutmeg, allspice, cinnamon.

How to make salty dough

First, mix the dry ingredients well in a bowl. Add liquid gradually (in parts) and knead soft dough... Knead the dough for about 10 minutes, add a little flour if necessary. As a result, the dough should be elastic, pliable, soft, but not liquid. Let the dough rest for 15-20 minutes before modeling.

How to make Play-Do plasticine

• 1 tbsp. flour;
• 0.5 tbsp. salt;
• 2 tsp citric acid;
• 1 tbsp. l. vegetable oil;
• water (no more than 0.5 cups);
• food colorings.

Combine all dry ingredients in a saucepan, then add vegetable oil. Put the mixture on medium heat and add water in portions. Stir until the mixture thickens and becomes smooth. Colorants can be added to all of the water at once. Or you can make the dough thicker, divide it into several parts and add a small amount of food coloring diluted in water to each part. Place the mixture on a lightly floured table. Stir until smooth for 5 minutes.

Natural dyes for dough

If you add dyes to the sculpting mass, you can get the following colors:

• emerald - 5-10 drops of brilliant green;
• coffee - strong coffee or cocoa powder;
• scarlet - pomegranate or cherry juice;
• lilac - beet or black currant juice;
• yellow - turmeric powder.

Mass recipes for sculpting

Mass for modeling in contrast to the dough, it is more elastic, pliable and stretches well. Lego do it yourself at home from simple ingredients.

Air mass for modeling

Easy-to-prepare mass for modeling based on starch and shampoo (liquid soap or shower gel).

• 400 gr. potato or corn starch;
• 200 gr. fragrant shower gel;
• dyes, spices or glitter (optional).

Add shower gel to the starch, mix well and remember the mass until a homogeneous consistency is obtained. Knead for about five minutes and let it rest for a few more minutes. The mass should turn out to be very soft, roll out well and keep its shape.

Store the mass for 2-3 days in a container or zip bag, in the refrigerator.

Yoghurt mass for modeling

Easy to prepare and safe. A fragrant and airy yoghurt sculpting mass is a real tactile delight for children.

Ingredients:

• 3/4 Art. corn starch;
• 1 tbsp. yoghurt (uniform consistency without pieces of fruit, etc.);
• dye (optional).

Combine all ingredients in a bowl. When the mixture stops sticking to your hands, roll the mass into a ball. If the mixture is still too sticky, add a little starch. Conversely, if the mass has become too dry - yogurt.

The mass keeps its shape for several hours, it is not worth storing it longer.

Snow mass for modeling

The snow mass is incredibly pleasant to the touch, very delicate, like a cloud in your hands. Mass games will give your child new tactile sensations and will captivate for a long time.

Ingredients:

• 3 tbsp. baking soda;
• 1/2 tbsp. shampoo;
• 5 tbsp. l. water (~ 1 / 4st.);
• 1/8 Art. liquid watercolor or 2-3 drops of food coloring (optional);
• 1/4 Art. citric acid.

Put baking soda in a large container, knead all the lumps with your hands (you can entrust this process to your child). Add food coloring or liquid watercolor to the shampoo, mix well until a uniform color is obtained. Combine the colored shampoo with baking soda and knead the mixture with your hands or using a spatula. Add water to the resulting mass and knead until a crumbly structure is formed that easily holds its shape.

From the snow mass, you can sculpt Easter cakes using molds, build towers, snow caves and much more. When the child gets tired of the game, sprinkle the mass with citric acid or lemon juice evenly, stir and you will see how it starts to sizzle and becomes more and more friable. The reaction will take about an hour.

Self-hardening modeling compound

Ideal for children's creativity, as it has a natural composition, plastic, does not stick to hands, hard after drying and can be painted with paints.

Ingredients:

• 1 tbsp. baking soda;
• 1/2 tbsp. corn starch;
• 3/4 Art. cold water.

Place the starch and baking soda in a small saucepan. Pour in water and stir the mixture well. Put on medium heat and, stirring continuously, cook the mixture until it becomes similar in consistency to mashed potatoes... (It is important not to digest the starch, otherwise you will get a viscous sticky mass!) Put the mixture on the table. When cool, knead until it turns into a soft, elastic, not sticky mass.

Leave the finished crafts to dry for several hours at room temperature. After drying, the products become hard and white. Cracks may form on large figures. Cover them with fresh dough or paint over.

How to store dough and modeling mass

It is necessary to store homemade clay in the refrigerator in a closed container or in a plastic bag. The shelf life is several days.

Ideas for crafts and games with children

Space themed game

To play you will need: dough, foil balls, glass decorative stones, a star-shaped mold and themed toys (rocket, astronaut, etc.). To make a space dough, add black dye and silver star glitter.

Source: theimaginationtree.com

In search of pirate treasures

To play you will need: modeling dough, a small chest, various "jewelry" (decorative stones, gold coins, beads, jewelry, etc.), a small spatula. Make any modeling dough with golden yellow dye (turmeric) and gold glitter.

Source: onetimethrough.com

Crafts from salt dough"Monsters"

Make a dough for modeling multiple colors. Prepare various materials for creativity: plastic eyes, chenille wire, decorative stones, cocktail tubes, etc. (v ).

Source: fantasticfunandlearning.com

Constructor from colored pasta and homemade plasticine

To play you will need: colored dough for modeling, pasta of various shapes, gouache. Paint the pasta with gouache in advance. Use the dough to hold the pasta together and build any structures.

Source: kidsplaybox.com

The magical world of fairies

To play you will need: dough of several colors (as in the photo), natural or artificial flowers, small figurines of fairies, forest animals and insects (c).

Attention - in all this, salty dough will help in the best possible way. And cooking it is not at all difficult. For this we only need a little water, flour and salt.

Salt dough mass recipes

Homemade mass for modeling

Basically, the recipes are very similar to each other. The main ingredients are flour, salt and water. Only components such as lemon acid, tartar and the presence of food coloring.

But among these recipes there are some that are being prepared no flour or water ... The method of making homemade plasticine also differs: in the microwave, on the stove, or you just need to knead it with a spoon.

Homemade sculpting mass can be stored in the refrigerator few weeks (in a sealed bag or plastic container with a lid).

To clearly demonstrate to you the process of making molding mass(and also: DIY finger paints and colored cereals), I recorded a video 🙂

If you want to receive a video by mail, enter your coordinates in the form below - and I will try send you a video as soon as possible, as well as - detailed step-by-step PDF instructions making all developmental materials with your own hands.

I have deep respect for all my readers, so your data will never be passed on to third parties and you will never receive spam, I guarantee.

So, enter the data into the form and get a video of the preparation of all educational materials today 🙂:

Mass for modeling No. 1

Ingredients:

• 1 cup flour;
• 1 glass of cold water;
• ½ glass of salt;
• 2 teaspoons of tartar;
• food coloring for color;

Cooking method:

Mix flour with salt, gradually adding water. Add tartar, oil and food coloring. Cook over medium heat until a ball forms. We knead the mass well when it cools down.

Mass for modelingNo. 2 (cook on fire)

Ingredients:

• 1 cup flour;
• 1/2 cup warm water
• 1/4 cup salt
• 1 tablespoon vegetable oil;
• food coloring for color;

Cooking method:

Mix flour and salt and pour all ingredients into boiling water. Cook while stirring over low heat. As soon as the sculpting mass takes the shape of a ball, place it on a floured surface. When it cools down, knead until it does not stick to your fingers and becomes elastic.

Modeling mass No. 3 (knead in boiling water)

Ingredients:

• 2 cups of flour;
• 2 cups boiling water;
• ½ glass of salt;
• food coloring;
• a few drops of glycerin (for shine);

Cooking method:

Mix flour with salt, tartar and butter. Add to boiling water, stirring constantly. Next, you need to add food coloring and glycerin. Knead well when the mass has cooled. It is necessary to reach a state when the stickiness disappears (if necessary, add flour).

Mass for modeling # 4 (we cook in the microwave)

Ingredients:

• 2 cups of flour;
• 2 glasses of water;
• 1 glass of salt;
• 1 tablespoon vegetable oil;
• 1 tablespoon of tartar;
• food colorings;

Cooking method:

It is necessary to mix all the ingredients (first flour and salt, then add water, oil, tartar and dyes) and pour the resulting mass into a baking dish. Close the dish with a lid and put it in the microwave for 4-5 minutes (at medium microwave speed). We form the mass into a bun and knead when it cools down.

Mass for modeling# 5 (cook without water)

Ingredients:

• 300 grams of flour;
• 325 grams of salt;
• 2 tablespoons of wine vinegar
• 2 tablespoons of vegetable oil;
• food coloring;

Cooking method:

Salty dough

The flour must be mixed with salt and wine vinegar. Next, add vegetable oil and food coloring. We put the pan on little fire and stir until a thick mass is formed. We let our future modeling mass cool down and knead it well.

Mass for modelingNo. 6 (cook without flour)

Ingredients:

• 2 cups baking soda
• 1 cup starch ;
• 1/2 glass of water
• food coloring;

Cooking method:

Mix the baking soda and starch together. Add water in portions, stirring constantly. Cook over low heat until dough forms a ball. Next, we freeze and knead the mass for modeling.

Mass for modelingNo. 7 (with jelly)

Ingredients:

• 1 cup flour;
• 1 glass of warm water;
• 2 tablespoons of salt;
• 2 tablespoons of tartar;
• 2 tablespoons of vegetable oil;
• about 100 grams of jelly;

Cooking method:

All ingredients are mixed and put in a saucepan over medium heat until a ball forms. When the mass has cooled down, it must be kneaded well. If it sticks to your hands, add flour.

Mass for modelingNo. 8 (with citric acid)

Ingredients:

• 2 cups of flour;
• 2 cups boiling water;
• ½ glass of salt;
• 2 tablespoons of vegetable oil;
• 2 tablespoons of citric acid;
• 1 teaspoon of glycerin;
• food coloring;

Cooking method:

Mix flour, salt, citric acid thoroughly. Add vegetable oil to boiling water and pour into flour. We knead the dough. Knead until the sculpting mass is smooth and pleasant to the touch.

Mass for modeling No. 9 (simple, salty)

Ingredients:

• 1 cup flour;
• 1 glass of cold water;
• 2 cups salt

Preparation:

We mix flour and salt, add water in portions, constantly stirring the dough. Thoroughly knead the mass, first with a spoon, and then on a floured surface until a bun is formed. If necessary, add flour so that the mass does not stick to your hands.

Mass for modeling # 10 (our favorite)

Our sculpting mass

I like this recipe most of all because it is simple enough, does not contain products that are not always on hand (for example, tartar or citric acid). The mass does not need to be cooked, which personally suits me very much 🙂

Ingredients:

• 1 cup flour;
• 1/2 cup cold water
• 1/2 cup fine salt
• Food coloring;
• Glycerol;

Preparation:

Mix salt with flour and add water in portions. We knead well. If the mass sticks to your hands, add a little flour, if it crumbles, add a little water. That's all. Very simple.

About food colors if they are not at hand, they can be easily replaced with analogs. For example, a green color can be obtained by adding a few drops of brilliant green to the dough, brown - cocoa, red - cherry juice, purple - black currant, yellow - turmeric.

I did this, first I kneaded the dough, and then I divided it into pieces and added to each natural dye (turmeric, black currant and brilliant green ).

Natural dyes

Food coloring can be added both at the very beginning of cooking in the dough itself, and later at the stage when the dough is ready.

Hope you find the sculpting recipes useful!

Good and fun creativity and modeling!

All the best!

Sincerely,
Marina Kruchinskaya

Modeling is a very interesting and exciting activity. It develops memory, improves thinking, imagination and imagination, promotes the development of fine motor skills, and also helps to relax, for a while to forget about everyday problems and difficulties.

In order to do what you love, it is not at all necessary to visit a specialized clay modeling studio. You can create small masterpieces without leaving your home, when you want it. And in this matter, a self-prepared mass for modeling will help.

You can make it from completely ordinary products, which are almost always found in every home. In today's article we will tell you how you can make a mass for sculpting, as well as how long and how it can be stored.

DIY modeling mass: recipes

There are many options for modeling mass, but the main components of all of them are salt, water and flour. The recipes differ from each other only in the content of starch, various food colors and tartar.

The homemade base of creativity is stored for about two weeks (and sometimes more) in the refrigerator. To prevent the dough from shrinking, it should be placed in a plastic bag and tied tightly.

Simple sculpting mass

• 160 g flour;
• 125 ml of plain warm water;
• 80 g of common coarse salt;
• 1 tbsp. a spoonful of any vegetable oil;
• a pinch of food coloring.

1. Pour water into a saucepan or saucepan, bring to a boil. In the meantime, mix the dry ingredients thoroughly and gently, stirring continuously, add them to the water;
2. As soon as the mixture takes the shape of a ball, turn off the heat and place it on a floured surface so that the mass does not stick, and leave to cool;
3. As soon as the material has cooled, start kneading until it becomes plastic and stops sticking to your fingers.

Mass for modeling from soda and starch

• a glass of starch;
• two glasses of regular baking soda.

1. In a separate bowl, stir the starch and baking soda until smooth. Pour the mixture into a saucepan or saucepan, add a little water and put on fire. Add water from time to time, stirring the dough continuously;
2. When the mixture takes on the shape of a ball, put it on the table, cool and start kneading;
3. Advice. It is best to use cornstarch to prepare your creative material. Potato, of course, is also suitable, but with corn mass it turns out to be much more plastic, and later it will be much more pleasant and easier to work with it.

Mass with gelatin

• one and a half glasses of warm water;
• 160 g flour;
• 28 g salt;
• 28 g of tartar (potassium salt of tartaric acid);
• 2 tbsp. spoons of any vegetable oil;
• 1 teaspoon of gelatin.

1. Dissolve a spoonful of gelatin in half a glass of hot water, mix thoroughly and cool at room temperature;
2. Once the jelly has cooled, mix it with the rest of the ingredients and knead until smooth. If the material sticks to your hands, add a little more flour.

Microwave mass

• glass of water;
• a glass of flour;
• a glass of salt;
• 30 g of tartar;
• 1 tbsp. a spoonful of vegetable oil.

1. Stir dry ingredients in a small bowl. Now add oil, water, tartar into the mixture and paint

Transfer the resulting dough to a baking bowl and microwave. Set the power to medium and set the time to 5-6 minutes;

After the allotted time, take out the mixture and knead well.

Self-hardening mixture

The indisputable advantage of self-hardening sculpting masses is that they do not need to be dried later in the oven or taken out into the street. They turn to stone over time on their own, upon contact with air at room temperature.

• a glass of starch;
• a glass of fine-grained putty;
• 5 glasses of PVA glue;
• 3 drops of glycerin;
• a pinch of citric acid.

1. In a separate container, combine all of the listed ingredients using a wooden spoon. It is very important that the dough has a uniform consistency;
2. Lubricate your hands with a greasy cream or butter, put the dough on the table, knead well and immediately place in a plastic bag so that it does not dry out.

Mix without added water

• 320 g of salt;
• 320 g flour;
• 30 ml wine vinegar;
• 50 ml of vegetable oil;
• dyes if necessary.

1. Toss the flour, salt and wine vinegar thoroughly. Add vegetable oil and color there. Then transfer to a saucepan, put on low heat and, stirring, cook until thick;
2. Cool, remove from the pan and knead well.

Papier-mâché mass

Making a homemade plastic mass for sculpting papier-mâché is a snap. This material is especially appreciated by art lovers, because the figures from it are light and beautiful. Papier-mâché can be used to create masks, hats, figurines, Christmas tree decorations etc.

• 3 rolls of toilet paper (preferably stiff) or several cardboard egg trays;
• 3 tbsp. spoons of liquid soap or dishwashing detergent;
• 3 teaspoons of PVA glue;
• 15 Art. spoons of latex or oil-glue putty;
• mosquito net.

1. Tear toilet paper or egg trays into small pieces, refill with hot water and knead with a long, thin spatula until a thick, creamy dough forms;
2. Now let's start pumping. Pour the liquid onto the grid in small portions, and squeeze it out well each time;
3. Grind the resulting paper lumps in a food processor or blender until you get fibrous cereals;
4. Now add glue, liquid soap or dishwashing detergent, putty to this crumb and mix well;
5. If the resulting dough sticks to your hands, add a little more soap to it, and if it falls apart, add more PVA glue;
6. Advice. If you want to prepare a lot of papier-mâché for future use, just dry it, and when necessary, add the required amount of water.

Mass without cooking

• a glass of flour;
• half a glass of fine salt;
• half a glass of cold water;
• a teaspoon of glycerin.

1. Mix dry ingredients. Without stopping kneading, add in small portions cold water... Add glycerin and knead again until the mixture is smooth and elastic;
2. If the piece crumbles, add a little water, and if it sticks to your hands, add flour.

Simple homemade plasticine

This material is an analogue of ordinary plasticine, which children love so much. It does not stick to hands, clothes and furniture, it is completely safe for children, and it is very easy to make it.

• 60 g flour;
• 55 ml shampoo, shower gel or liquid soap;
• dyes.

1. Mix all ingredients until smooth, add color. That's it - the plasticine is ready!

To create crafts, as a rule, use common food colors available at any grocery store. But if you are unable to buy them, replace them with analogs. For instance, Brown color can be obtained by adding a little cocoa to the dough, green - brilliant green solution, yellow - turmeric, purple - blackcurrant juice, red - Cherry juice etc.

Colorants can be added both at the beginning and at the end of cooking.

As you can see, making a plastic mass for modeling yourself is not difficult at all. Experiment, fantasize and have fun!

DIY mass for modeling a simple recipe

All you need is cornstarch and hair conditioner. And also for beauty, you can add any food coloring. Now, by Easter, every store is full of them. I prefer liquid from pastry shops... However, in the same Auchan at any time of the year there are liquid Parfait dyes at a price for a set of 50 rubles. Enough for a very long time.

For every half cup of hair conditioner or balm

As for the proportions for making the modeling mass, they can vary depending on the conditioner, so if it's too liquid, add starch (don't overdo it), if it's thick, add balm.

In our photo, one is thicker, for sculpting, the second is softer, for "wrinkling".

Everything is in stores)

The only difficulty that may arise the first time is buying cornstarch and choosing a hair balm. There is corn starch in the same hypermarkets (in Auchan in a large yellow box), closer to home in St. Petersburg I found it in a pack in Real Madrid at a price of 38 rubles.

Hair balm should be just a balm, not a shampoo or mask. With a cheap Clean Line, not everyone succeeds. I tried with Faberlikovsky very inexpensive, just everything was not to finish the bottle, it worked out great with him. With expensive handmade balm (though I had it for a year) it turned out worse. In general, try with what you have at home)

He mixed everything at once, the dye was added dropwise to the desired color. Our colors are not bright, you can make a lot of any saturation.

The mass turns out to be unusually tender, soft, pleasant to the touch. Suitable for tactile sensations: crumple, twist, leave prints with everything that you can find at home, suitable for play-do molds. It is not suitable for sculpting serious figures, rarely when it solidifies into a strong one. But the relaxation from playing with this mass with your own hands is complete! Stick the figures too and make prints, but not for the subsequent game) It is better to store it immediately in a plastic wrap so that it does not dry out. For an hour of play is definitely enough.

For future solid figures, if exactly the result is needed, I can advise the recipe for salt dough with my own hands, but believe me, these are completely different things and the child will be delighted with this mass with his own hands)

How to make polymer clay at home: a recipe

Do you like to make souvenirs and decorations made of polymer clay? Many children enjoy making all kinds of crafts, but the purchased material is not too budgetary. Read on for how to make polymer clay at home. All the components are available, the technology is simple. And most importantly, you will know exactly what is included in the sculpting mass with which your baby is engaged.

There are a lot of recipes for the preparation of polymer clay, or rather its analogue in properties. All of them can be roughly divided into the following categories:

• On cornstarch.
• Based on potato starch.
• With and without petroleum jelly.
• With heating in the microwave.
• Heated in a water bath.
• With the cooking process on the stove.
• Cold way.

As you can see, the options differ in manufacturing technology, materials used and their percentage.

Simple ingredients: glue and cornstarch

The mass obtained according to this recipe will almost completely correspond in its properties to the purchased polymer clay. The only drawback of this composition is that the work done from it will decrease by about 30% after drying in weight and size, respectively. Pay attention to this minus and keep in mind that the products need to be made of a slightly larger size than you would like to see ready-made version... Crafts from this composition should dry for at least a day.

If you don't know how to make polymer clay at home, start with this recipe as the ingredients are cheap and readily available. You will need the following:

• 1 cup cornstarch
• 3/4 cup of building PVA (you can buy it in the store) or baby (with it, the consistency of clay is softer).
• 2 tbsp. l. mineral oil (motor) or baby oil.
• 1 tbsp. l. lemon juice.
• Heat-resistant mixing bowl with non-stick coating.
• Stirring spatula or spoon.
• Hot pot holder.
• Gloves.

How to make cornstarch mass

The sequence of actions is as follows:

• Mix the correct amount of cornstarch and glue in a heat-resistant container at room temperature (do not heat yet). The proportions of ingredients can be increased or decreased as a percentage.
• Mix the resulting composition well until smooth.
• Add prepared mineral oil and lemon juice.
• Stir until smooth.
• Place the container on the stove and heat, stirring constantly, until a puree-like consistency is obtained.
• Remove the container onto the stand.
• Better to add a little more mineral oil.
• Place the mixture on a table (preferably covered with something heat-resistant). You can use a tray or cutting board.
• While the mixture is still hot, put on gloves and knead it thoroughly until it is uniform, like a pizza dough.

Now you know how to make polymer clay at home using simple ingredients. It is worth noting that the resulting mass only repeats the properties of polymer clay, but is a more natural product, and not a composition prepared on the basis of plastics, as in the case of the purchased option.

Microwave glycerin recipe

The first method reviewed taught you how to make polymer clay at home without petroleum jelly, but the addition of this ingredient softens the consistency, making the composition more plastic. When dry, a craft made of such material will definitely not crack when it shrinks. The mass for modeling turns out to be quite sticky not only due to glycerin, but also due to a larger proportion of glue, therefore, it is better to prepare it a day before the start of the creative process, or better - a few days. The following components will be required:

• 1 glass of glue.
• 1 cup cornstarch
• 1 tbsp. l. petroleum jelly.
• 2 tbsp. l. lemon juice.
• 1 tbsp. l. non-greasy and silicone-free hand cream.
• The tools are the same as in the previous method.

How to make polymer clay in the microwave

The stages of work are as follows:

• In a heat-resistant bowl, mix the glue, cornstarch and petroleum jelly thoroughly until smooth.
• Add lemon juice and stir well.
• Place the container in a microwave oven at maximum power for 30 seconds.
• Stir the mass.
• Leave for another 30 seconds in the same mode.
• Remove the bowl from the oven.
• Lubricate the work surface (board, tray, table) with hand cream on which you will knead the mass.

• Remove the dried crust formed in the oven from the mass and discard.
• Take the plastic component and lay it out on your work surface.
• Knead the mixture vigorously and thoroughly like a dough. It should become pliable and resilient.
• Make a sausage out of the mass and place on a cloth. It should absorb excess moisture.
• The completely cooled mass can be stored.

How to make polymer clay at home: a recipe without cooking

Many technologies are similar and the sequence of steps is also similar. However, the above methods require heating. This is not always convenient, since it is associated with the need to observe safety precautions. Now you will learn how to make polymer clay at home without a microwave and stove. Such a cooking recipe can be mastered even with children. Not only the sculpting process, but also making the mass for crafts can be easily turned into an exciting activity for a child. The ingredients are:

• Cornstarch - 200 g.
• PVA - 200 g.
• 1 tbsp. l. petroleum jelly.
• 2 tbsp. l. petroleum jelly (can be replaced with cream).
• 1 tbsp. l. perfume (optional).

The manufacturing process consists in the fact that starch is slowly mixed into the mixture of liquid-oil ingredients in small portions until a mass, pleasant to the touch and suitable for sculpting, is obtained. Divide it into several pieces and give each one its own shade. You can mix both tempera and watercolor. If in the process of work the mass begins to dry out and crumble, it is enough to add another cream and mix the composition thoroughly with your hands until a homogeneous consistency is obtained.

Do you have potato starch? Consider how to make polymer clay at home

Photos of the stages of work clearly demonstrate that creating a mass for sculpting at home is a simple matter. The problem may be that you don't have the right ingredients and tools in your arsenal. Without microwave oven you can completely get by using methods with heating on a conventional gas stove, but not everyone has corn starch. If you are faced with such a problem and you are thinking of how to make polymer clay at home without starch, alternatively take a recipe with potato starch... It's cheap and affordable.

Prepare the following to work:

• 100 g PVA glue.
• 100 g of potato starch.
• 1 teaspoon petroleum jelly or hand cream.
• 2 tsp baby oil.
• A spatula or spoon for mixing.
• Two heat-resistant containers of different sizes for a water bath.
• Smooth table surface.

The sequence of making a mass based on potato starch

According to this recipe, polymer clay is prepared as follows:

• Combine all ingredients in a smaller bowl.
• Pour an arbitrary amount of water into a large container so that the smaller one, put in this one, is in the water, but stands at the bottom, and does not float.
• Mix the mass thoroughly and do not overheat it.
• When lumps start to form, remove from the stove and place on a surface greased with cream and continue to knead (if the mass has not overheated, then your hands should not be hot).
• When the surface of the clay is smooth and wrinkles are not formed, wrap the mixture in plastic wrap and leave for 12 hours.

After that, you can start modeling or remove the clay for storage.

You have learned how to make polymer clay at home with and without the microwave. You may have already chosen suitable recipe but don't know how to make a ton of color. There are two ways:

• Color the finished craft.
• Add pigment while preparing the mass.

After drying, the finished product can be covered with acrylic paint, tempera, and even white areas should be primed, since the material itself will seem slightly transparent, that is, a saturated white shade may not work.

As for the second method of staining, the main thing here is not to overdo it. During the preparation process, acrylic, aniline or food colors can be added to the mass, but there should not be a lot of them. Otherwise, the structure of the material and its properties may change.

Now you know how to make polymer clay at home. Recipes, of course, differ from each other both in terms of the constituent ingredients and the manufacturing technology. However, it is worth remembering that in all cases, in order to get high-quality material for crafts, you need not only to properly prepare it, but also store it until you decide to blind something from it.

The mass obtained in any way must be kept in the refrigerator, always in an airtight container. It can be a plastic bag, a plastic container. The prepared clay is placed in a suitable container. If the mass is still not completely cooled, leave a small hole between the lid and the bottom of the container, or do not tie the bag completely, just remember to close it when the mass has cooled down. Otherwise the material will dry out before you decide to use it.

Now you know how to make polymer clay at home different ways... Choose the appropriate method based on the ingredients you need or ease of manufacture.